300Mbps 2.4G Wireless Wifi Repeater AP Router Dual Antenna Signal Booster Extender Amplifier COD

Compatibility

To confirm that this part fits your vehicle, please enter your vehicle's details below.

• Select
• Make:
• Select
• Submodel:
• Select
• Engine:

This part is compatible with vehicle(s).Show all compatible vehicles 1

• Year
• Make
• Model
• Submodel
• Trim
• Engine

Features:1. Provide a 10/100M Ethernet (WAN) interface for XDSL modem/ Cable modem/ Ethernet.2. Support wireless transmission rate up to 300Mbps, with rate adaptation function, automatically adjust wireless transmission rate.3. Networked static IP, dynamic IP, PPPOE dialing, wireless relay.4. Support encryption and security mechanisms such as WPA/WPA2, WPA-PSK/WPA2-PSK.5. Adopt seamless roaming technology to ensure efficient wireless connection.6. Built-in network address translation (NAT function, support for virtual servers, special applications and DMZ hosts.7. Built-in DHCP server and static address allocation at the same time.8. Support Universal Plug and Play (UPNP), data conforming to UPNP standard can pass smoothly.9. Support QoS bandwidth control function, which can effectively allocate the download rate of the client.10. Support dynamic DNS function, able to provide domain name service for dynamic IP address.11. Built-in static routing function, you can build a special network topology as needed.12. Support wired to wireless, wireless to wireless, wireless to wired.13. In the routing mode, the port is the WAN port input, and in the relay mode, the port is the LAN port output.14. Full English configuration interface with easy installation wizard (Wizard).15. Support Chinese, English, Russian, Spanish, Italian, German, Japanese, French, Portuguese, Arabic, etc. to switch freely.16. PC and mobile phone settings page automatically adapts automatically.17. When there is no network, it will automatically enter the WEB setting page and access the Internet in three steps.

System requirements:* WLAN access point/client according to IEEE 802.11n, g, b* 110 ~ 230 volt socketThe WLAN client must support at least the WPA eccyption standard.WLAN  access point and the WLAN client with automatic IP address assignment(DHCP)Forwarding of IPv4-based protocols/ Address Resolution ProtocolThe network name(SSID) of the WLAN access point must be set to "visible"

Note:1. Make sure the repeater is placed in a location where it can receive a strong signal from your desired wireless Internet connection. The repeater will not work without a signal that it can repeat2. The wireless signal rate based on the IEEE 802.11b chipset standard, g, n used. Actual flow may vary. Network conditions and environmental factors reduce the actual flow. All specifications are subject to change without notice.3. Please allow 0.5-1cm differences due to manual measurement.4. Due to the light and screen difference, the item's color may be slightly different from the pictures.