41g Happymodel Crux3 115mm CrazybeeX FR V2.2 F4 AIO ESC 25/200mW VTX 1-2S 3 Inch Toothpick FPV Racing Drone BNF w/ 1202.5 Motor Caddx ANT 1200TVL Camera Support Insta360 Go

Compatibility

To confirm that this part fits your vehicle, please enter your vehicle's details below.

• Select
• Make:
• Select
• Submodel:
• Select
• Engine:

This part is compatible with vehicle(s).Show all compatible vehicles 1

• Year
• Make
• Model
• Submodel
• Trim
• Engine

Brand Name: Happymodel

Model: Crux3

Item Name: 115mm F4 OSD 1-2S 3 Inch Toothpick FPV Racing Drone

Wheelbase: 115mm

Size: 97x97x35mm (without propellers)

Optional Receiver Version:

Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)

Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)

Internal SPI DSM2/DSMX version(Compatible with Spektrum or Multiprotocol DSM2/X radio)

Weight: 41g (without battery)

Recommend Lipo Battery: 2s 350mah/400mah/450mah/520mah Battery ( NOT Included)

EX1202.5 6400KV Motor	Configu-ration:9N12P Stator Length:2.5mm Motor Dimension(Dia.*Len):Φ14*14.5mm No.of Cells(Lipo):1-2S
Gemfan 3018 2-Blade Propeller	Center Thickness:5.5mm Prop Diameter:76.5mm Center Hole diameter:1.5mm
	Sensor: MPU6000 or ICM20689 or BMI270 (SPI connection) Power Supply: 1-2S battery input (DC 2.9V-8.7V) Built-in Betaflight OSD(SPI Control) Built-in SPI Frsky/Flysky receiver or no receiver
	MCU upgraded to EFM8BB21 Support BLHeliSuite programmable Default protocol: DSHOT600
Onboard Frsky SPI D8 Receiver Version	SPI BUS receiver Frsky D8 compatible Failsafe support
	Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
	Failsafe support RSSI enable (show on the goggles)
Onboard 5.8G 40CH 25/200mW VTX	Frequency: 40CH Current consumption: 300mA(type) With Race band  Smartaudio ready
Caddx ANT 1200TVL Camera	Image Sensor: 1/3" CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL Switchable IMAGE:  4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES BLC: YES WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-18V Work Temperature: -20℃~+60℃ Weight: 2g (N.W.)

Features:

Pacakge Included:

1x Optional Receiver

1x F4 Flight Controller AIO 5A ESC Board

1x 5.8G 25-200mW VTX ( built-in Flight controller)