iFlight Nazgul XL5 V3 Analog 240mm 5 Inch 6S Freestyle FPV Racing Drone BNF/PNP RaceCam R1 Cam BLITZ F7 E45S 45A ESC 2207 1800KV Motor COD

Compatibility

To confirm that this part fits your vehicle, please enter your vehicle's details below.

• Select
• Make:
• Select
• Submodel:
• Select
• Engine:

This part is compatible with vehicle(s).Show all compatible vehicles 1

• Year
• Make
• Model
• Submodel
• Trim
• Engine

v3 Diffirence:

- change the frame kit into v3 version ( like photos showed)

- change the vtx into BLITZ 1.6W VTX

	new V3 Version
Nagul5 v2 frame Kit Wheelbase:   240mm*240mm	Nagula XL5 v3 frame kit Wheelbase: 245士2mm Size: 173*173*37 士2mm
SucceX Force 5.8g 800mW VTX Adjustable - Item: SucceX-Force 800mW adjustable VTX - 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW，250mA@500mW, 380mA@800mW - size:36*36*3mm	BLITZ 1.6W VTX  Input voltage: 7V～36V  Power levels: PIT/25mW/400mW/800mW/1600mW Mounting pattern: 30.5x30.5mm/Φ3  VTX telemetry: IRC Tramp RC Tramp VTX table values: 25/400/800/1600mW

- Comes with BLITZ 1.6W VTX , high power, strong anti-interference

 - The center of gravity of the fuselage is low, the flight is more stable, and freestyle more easily

- Increase the anti-sparking module to prevent sparks caused by plugging in the battery and prolong the life of the battery plug.

- Compatible with Gopro5/6/7/8/9/10/11, DJI Action. ( NOT Included.)

Separate FC Link	MCU: STM32 F722 Barometer: DPS310 Flash: 32MB (Blackbox flash) Motor outputs: 4x (SH1.0 connector) Smartaudio / IRC Tramp VTX protocol supported Beeper pad: Yes Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter Weight: 7.8g
BLITZ E45S 4in1 ESC  (  Version to know more details )	Firmware: QH-40 16.7 Instantaneous current: 55A Current sensor: yes scale 200 Weight: 15g
here	KV: 1800KV Configuration: 12N14P Stator Length: 7mm Motor Dimension: 28.5x19.7mm (Dia*Len) Idle Current(10) @10V:  less than 1.2A                                      Internal Resistance:  81.5mΩ

 RaceCam R1 Mini Cam.

Caddx Ratel

Click Here

 V2  it is

Specification:

• XING-E 2207 FPV Motor （6S 1800KV )

- 5mm arm design for more durability

- LED illuminated Logo

- XING-E 2207 motors and NAZGUL 5140 props

- Popular True-X configuration

- Fits both 30.5x and 20x stacks

Package Included:

• 1x Nazgul5 V2 240mm 5 Inch 6S FPV Racing Drone
• 1x , 2.1mm lens 19x19mm camera
• Albatross RHCP
• 2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
• 20*250mm 

FACTORY SETUP and WIRING DIAGRAM:
This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more software tweaks enhance the flight experience.

No need to worry! can be found on our Google Drive: LINK