Mini M26 Gasoline Engine Model Mechanical Science Experiment Toys COD

Compatibility

To confirm that this part fits your vehicle, please enter your vehicle's details below.

• Select
• Make:
• Select
• Submodel:
• Select
• Engine:

This part is compatible with vehicle(s).Show all compatible vehicles 1

• Year
• Make
• Model
• Submodel
• Trim
• Engine

Specification:



1.Check the wiring of the engine from the board , connect the fuel tank pipeline , and install 3 No 5battery ( 4 . 5v )2 . Use gasoline ( 95 # ) to fill the fuel tank . After the filling is completed , turn the flywheel clockwise onthe right side of the engiswitch surface ) for many turns . No air can be generated.3 . Turn on the power switch and quickly rotate the flywheel clockwise on the right side of the engine( power switch surface ) to start the engine.

1 . Product maintenance methodThe engine is water-cooled , and you need to add water before each work . When you finish the work ,ou need to save the water .The working environment should be ensured in a clean environment to reduce the possibility of dustentering the carburetor .The carburetor oil needle has been adjusted in the best position before shipment . It is notrecommended to make a large adjustment . But it can be fine-tuned under different fuels.The cylinder head cover can be disassembled and lubricated on the valve mechanism.After the engine stops working , you need to remove the battery and save it.

3 . Lubrication methods and methods can add no more than 4ML of lubricating oil to the crankcase toensure splash lubrication of the crankshaft.

1. Put a few drops lubricating oil on the carburetor . Use an eletric dril to drive the engine for awhile Under the action of the lubricating oil , the foreign matter is discharged to restore the cylinder pressure.

1. Please understand the product might have some colour difference due to different monitors and scenes.

Package Included:

1x  Mini M26 Gasoline Engine Model